Chapter 5 Configuring Feature And User - Cisco 3951 Administration Manual

Telephony Features Available for the Cisco Unified IP Phone
Table 5-1 Telephony Features for the Cisco Unified IP Phone
Feature
Call Forward All
Call Waiting
Caller ID Blocking Allows users to block their phone numbers
Conference
Message Waiting
Indicator
Cisco Unified SIP Phone 3951 Administration Guide for Cisco Unified CallManager 5.1
5-2
For information about using most of these features on the phone, refer to Cisco
Unified SIP Phone 3951 Phone Guide for Cisco Unified CallManager 5.0.
Description
Forwards all calls sent to the phone to the
number specified.
Indicates (and allows a user to answer) an
incoming call that is received while the user
is on another call.
Call waiting also displays incoming call in-
formation on the phone screen.
from phones that have caller identification
enabled.
Allows a user to talk simultaneously with
up to two other parties (for a total of three
participants) by calling each participant
individually.
Refers to the light (or "lamp") on the phone
handset that blinks or glows to indicate an
incoming call or new voice message.
Chapter 5 Configuring Features and Users
Configuration Reference
Requires no configuration.
Users forward their calls by
entering the target number.
Requires no configuration.
For more information, refer to
Cisco Unified CallManager
Administration Guide, "SIP Profile
Configuration" chapter.
Requires no configuration.
Conferencing is supported on
Cisco Unified SIP Phone 3951
itself and does not use Cisco
Unified CallManager resources, so
the user must remain in the
conference for the two other
parties to stay connected and
interact with one another.
For more information refer to:
• Cisco Unified CallManager
Administration Guide,
"Message Waiting Configura-
tion" chapter.
Cisco Unified CallManager
•
System Guide, "Voice Mail
Connectivity to Cisco Unified
CallManager" chapter.
OL-10969-01