Installing Cisco Unified Ip Phones - Cisco 3951 Administration Manual

Chapter 1 An Overview of the Cisco Unified IP Phone
Table 1-2 Checklist for Configuring the Cisco Unified IP Phone 3951 in
Cisco Unified CallManager (continued)
Task
6. Configure a SIP Phone Dial Plan for
the Cisco SIP Phone 3951(optional).
7. Configure the system to support the
use of DTMF on the Cisco Unified
SIP 3951 Phone (optional).

Installing Cisco Unified IP Phones

Note
OL-10969-01
Purpose
To ensure successful call
completion on systems that
require digits to be sent one
at a time.
Provide users access to
voice-messaging systems or
to navigate interactive voice
response (IVR) applications
by using the keypad to
generate DTMFs.
After you have added the phones to the Cisco Unified CallManager database, you
can complete the phone installation. You (or the phone users) can install the phone
at the users's location. The Cisco Unified IP Phone Installation Guide that ships
in the box with each phone provides directions for connecting the phone handset,
cables, and other accessories.
Before you install a phone, even if it is new, upgrade the phone to the current
firmware image.
Cisco Unified SIP Phone 3951 Administration Guide for Cisco Unified CallManager 5.1
Overview of Configuring and Installing Cisco Unified IP Phones
For More Information
Refer to Cisco Unified Call-
Manager Administration
Guide,
"SIP Dial Rules Configura-
tion" chapter.
See the
Phone Dial Plan" section on
page
Refer to Cisco Unified Call-
Manager Administration
Guide,
"Media Termination Point
Configurations" chapter and
"Cisco Unified IP Phone"
chapter.
See the
Unified SIP Phone 3951 to Use
iDTMF" section on page
"Configuring a SIP
4-9.
"Enabling Cisco
4-9.
1-13