Configuring Cisco Unified Ip Phones In Cisco Unified Callmanager - Cisco 3951 Administration Manual

Overview of Configuring and Installing Cisco Unified IP Phones
Configuring Cisco Unified IP Phones in Cisco Unified
CallManager
Checklist for Configuring the Cisco Unified IP Phone in Cisco Unified CallManager
Cisco Unified SIP Phone 3951 Administration Guide for Cisco Unified CallManager 5.1
1-10
and configuring a complete Cisco Unified IP telephony network, refer to the
"System Configuration Overview" chapter in Cisco Unified CallManager System
Guide.
After you have set up the IP telephony system and configured system-wide
features in Cisco Unified CallManager, you can add IP phones to the system.
The following topics provide an overview of procedures for adding
Cisco Unified IP Phones to your network:

Configuring Cisco Unified IP Phones in Cisco Unified CallManager,

•
page 1-10
Installing Cisco Unified IP Phones, page 1-13
•
To add phones to the Cisco Unified CallManager database, you can use:
Auto-registration
•
• Cisco Unified CallManager Administration
Cisco Unified CallManager Bulk Administration (BAT)
•
For more information about these choices, see the
Unified CallManager Database" section on page
For general information about configuring phones in Cisco Unified CallManager,
refer to the "Cisco Unified IP Phones" chapter in Cisco Unified CallManager
System Guide and the "Cisco Unified IP Phone Configuration" chapter in Cisco
Unified CallManager Administration Guide.
Table 1-2 provides an overview and checklist of configuration tasks for the
Cisco Unified IP Phone in Cisco Unified CallManager Administration. The list
presents a suggested order to guide you through the phone configuration process.
Some tasks are optional, depending on your system and user needs. For detailed
procedures and information, refer to the sources in the list.
Chapter 1 An Overview of the Cisco Unified IP Phone
"Adding Phones to the Cisco
2-9.
OL-10969-01