Mounting The Phone To The Wall - Cisco 3951 Administration Manual

Chapter 3 Setting Up the Cisco Unified IP Phone

Mounting the Phone to the Wall

Caution
Step 1
Step 2
OL-10969-01
Related Topics
Mounting the Phone to the Wall, page 3-9
•
Verifying the Phone Startup Process, page 3-10
•
Configuring Startup Network Settings, page 3-11
•
You can mount the Cisco Unified IP Phone on the wall by using special brackets
available in a Cisco Unified IP Phone wall mount kit. (Wall mount kits must be
ordered separately from the phone.) If you attach the Cisco Unified IP Phone to a
wall using the standard footstand and not the wall mount kit, you need to supply
the following tools and parts:
Screwdriver
•
Screws to secure the Cisco Unified IP phone to the wall
•
Before You Begin
To ensure that the handset attaches securely to a wall-mounted phone, remove the
handset wall hook from the handset rest, rotate the hook 180 degrees, and reinsert
the hook. Turning the hook exposes a lip on which the handset catches when the
phone is vertical. For an illustrated procedure, refer to Installing the Wall Mount
Kit for the Cisco Unified IP Phone.
Use care not to damage wires or pipes located inside the wall when securing
screws to wall studs.
Procedure
Remove the footstand from the phone.
Modify the handset rest so that the handset remains on the ear-piece rest when the
phone is vertically placed.
Remove the handset from the ear-piece rest.
a.
Locate the tab (handset wall hook) at the base of the ear-piece rest.
b.
Slide this tab out, rotate it 180 degrees (left to right), and reinsert it.
c.
Cisco Unified SIP Phone 3951 Administration Guide for Cisco Unified CallManager 5.1
Installing the Cisco Unified IP Phone
3-9