Chapter 5 Configuring Features And Users; Telephony Features Available For The Cisco Unified Ip Phone - Cisco 3951 Administration Manual

Telephony Features Available for the Cisco Unified
IP Phone
OL-10969-01
Configuring Features and Users
After you install Cisco Unified IP Phones in your network, configure their
network settings, and add them to Cisco Unified CallManager, you must then use
the Cisco Unified CallManager Administration application to configure some
telephony features, and assign users.
This chapter provides an overview of these configuration and set up procedures.
Cisco Unified CallManager documentation provides detailed instructions for
these procedures.
You configure most telephony features on the phone itself. For additional
information, refer to Cisco Unified SIP Phone 3951 User Guide.
This chapter includes following topics:
Telephony Features Available for the Cisco Unified IP Phone, page 5-1
•
Adding Users to Cisco Unified CallManager, page 5-4
•
Adding Users to Cisco Unified CallManager, page 5-4
•
After you add Cisco Unified IP Phones to Cisco Unified CallManager, you can
add functionality to the phones.
features, many of which you can configure using Cisco Unified CallManager
Administration. The Reference column lists Cisco Unified CallManager and other
documentation that contains configuration procedures and related information.
Cisco Unified SIP Phone 3951 Administration Guide for Cisco Unified CallManager 5.1
C H A P T E R
Table 5-1 includes a list of supported telephony
5
5-1