Configuring Alternate Radius Server Settings; Selecting The 802.1X Eapol Version - NETGEAR ProSafe WG102-500 Reference Manual
802.11g wireless access point
Hide thumbs
Also See for ProSafe WG102-500:
- Installation manual (2 pages) ,
- Reference manual (52 pages)
Table of Contents
Advertisement
Configuring Alternate RADIUS Server Settings
Alternate RADIUS server settings override the general RADIUS server settings and apply
only to the devices that are connected to the individual SSID for which you configure the
Alternate RADIUS server settings.
To configure alternate RADIUS server settings for an individual SSID:
1.
Log in to the wireless access point at its default LAN address of http://192.168.0.229
with its default user name of admin and default password of password, or using
whatever LAN address, user name, and password you have chosen for the wireless
access point.
2.
Select Configuration > Wireless Networks. The Wireless Networks screen opens,
displaying 16 wireless security profiles (see
3.
To configure or edit a wireless security profile, select the corresponding Edit hyperlink to the
right of the wireless security profile. The Edit Wireless Network screen opens for the
selected wireless security profile. Scroll down to the Alternative Radius Server Settings
section.
4.
Select the Alternative Radius Server Enabled checkbox. The screen expands to display the
Alternative Radius Server fields. The fields are identical to the fields on the Radius Server
screen (see
Figure 3-9 on page
5.
Specify the fields that are explained in
6.
Click Save or Save to Flash & Activate to save your settings.
Selecting the 802.1x EAPOL Version
Most wireless devices support 802.1x Extensible Authentication Protocol over LAN version 2
(EAPOL v2) for RADIUS authentication. To accommodate wireless devices that do not
support EAPOL v2, you can configure the wireless access point to use both EAPOL v1 and
v2.
To configure the EAPOL version:
1.
Log in to the wireless access point at its default LAN address of http://192.168.0.229
with its default user name of admin and default password of password, or using
whatever LAN address, user name, and password you have chosen for the wireless
access point.
2.
Select Configuration > System > Security. The Security screen displays (see
on page
49).
48 |
WG102-500, WGAP150 ProSafe™ 802.11g Wireless Access Point
Figure 3-2 on page
46) but apply only to the selected wireless security profile.
Table 3-7 on page
38).
46.
Figure 3-10
Advertisement
Table of Contents
Troubleshooting
