NETGEAR ProSafe WG102-500 Reference Manual page 22

Figure 2-8
Specify the PPPoE fields as explained in
Table 2-3. PPPoE Settings
Field
PPPoE Username
PPPoE Password
PPPoE Password
(confirmation)
PPPoE Service Name
2. If you want to use the default IP address of the wireless access point (192.168.0.229) and
the default server IP settings that are defined in
select the Keep Default IP checkbox.
3. Click Save or Save to Flash & Activate to save your settings.
22 |
WG102-500, WGAP150 ProSafe™ 802.11g Wireless Access Point
Description
The PPPoE user name that your ISP has assigned to you.
The PPPoE password that your ISP has assigned to you.
Repeat the PPPoE password that your ISP has assigned to you.
The PPPoE service name that your ISP has assigned to you. If your
ISP did not assign you a service name, leave this field blank.
Table 2-3.
"Configuring LAN Settings" on page 23,