Configuring Wireless Quality Of Service; Configuring Wireless Traffic Shaping - NETGEAR ProSafe WG102-500 Reference Manual
802.11g wireless access point
Hide thumbs
Also See for ProSafe WG102-500:
- Installation manual (2 pages) ,
- Reference manual (52 pages)
Table of Contents
Advertisement
Configuring Wireless Quality of Service
To control reliability and availability of the wireless access point, you can allocate quality of
service (QoS) levels per SSID. For information about general default QoS levels (Gold,
Silver, and Bronze), multicast filtering, and multicast data rates, see
Wireless Network Settings" on page
these general QoS settings, you can assign specific traffic bandwidth limits (also referred to
as traffic shaping), filter incoming traffic, and configure advanced QoS settings, all per
individual SSID.
Configuring Wireless Traffic Shaping
To set limits on the bandwidth of incoming and outgoing wireless traffic for an individual
SSID:
1.
Log in to the wireless access point at its default LAN address of http://192.168.0.229
with its default user name of admin and default password of password, or using
whatever LAN address, user name, and password you have chosen for the wireless
access point.
2.
Select Configuration > Wireless Networks. The Wireless Networks screen opens,
displaying 16 wireless security profiles (see
3.
To configure or edit a wireless security profile, select the corresponding Edit hyperlink to the
right of the wireless security profile. The Edit Wireless Network screen opens for the
selected wireless security profile. Scroll down to the Bandwidth Settings section.
4.
Select the Bandwidth Management Enabled checkbox. The screen expands to display the
Upstream Limit and Downstream Limit fields.
Figure 3-15
5.
Specify the bandwidth limits:
•
Upstream Limit. Specify the bandwidth limit for outgoing traffic limit in kbps. The
default is zero, which specifies unlimited bandwidth.
•
Downstream Limit. Specify the bandwidth limit for incoming traffic in kbps. The
default is zero, which specifies unlimited bandwidth.
6.
Click Save or Save to Flash & Activate to save your settings.
54 |
WG102-500, WGAP150 ProSafe™ 802.11g Wireless Access Point
27, in particular
Figure 2-12
Figure 3-2 on page
"Configuring Basic
and
Table
2-7. In addition to
38).
Advertisement
Table of Contents
Troubleshooting
