NETGEAR ProSafe WG102-500 Reference Manual page 39

802.11g wireless access point
Hide thumbs Also See for ProSafe WG102-500:
Table of Contents

Advertisement

WG102-500, WGAP150 ProSafe™ 802.11g Wireless Access Point
Table 3-1. Wireless Network Settings (continued)
Field
BSSID
Edit (hyperlink)
3.
To configure or edit a wireless security profile, select the corresponding Edit hyperlink to the
right of the wireless security profile. The Edit Wireless Network screen opens for the
selected wireless security profile. The first section on the screen is the Basic Settings
section.
"Configuring Basic Wireless Network Settings" on page 27
section. Scroll down to the Security Settings section.
Figure 3-3
4.
Select one of the following security options from the Security Policy pull-down menu:
None. No security is the default settings.
Static WEP. See
802.1X. See
WPA-TKIP. See
WPA2-AES. See
WPA-TKIP and WPA2-AES. See
WPA-PSK+WPA2-PSK Mixed Modes" on page
5.
Click Save or Save to Flash & Activate to save your settings.
Note:
If you use a wireless computer to configure wireless security
settings, you will be disconnected when you click Save to Flash and
Activate. Reconfigure your wireless computer to match the new
settings, or access the wireless access point from a wired computer
to make further changes.
For more information about wireless security options, see the online document that you can
access from
"Wireless Networking Basics" in Appendix
Description
The detailed BSSID for the wireless security profile. This BSSID consist of
the MAC address of the wireless access point with the last digit altered. If
the MAC address ends with F0, the BSSID for the first profile ends with F1,
for the second profile with F2, for the thirds profile with F3, and so on.
The hyperlink to the Edit Wireless Network screen with the configurable
fields for the wireless security profile.
"Configuring Static WEP" on page
"Configuring Legacy 802.1X (or Dynamic WEP)" on page
"Configuring WPA and WPA-PSK (TKIP)" on page
"Configuring WPA2 and WPA2-PSK (AES)" on page
"Configuring WPA+WPA2 and
explains the fields in this
40.
41.
44.
B.
41.
43.
| 39

Advertisement

Table of Contents
loading

This manual is also suitable for:

Prosafe wgap150

Table of Contents