WG102-500, WGAP150 ProSafe™ 802.11g Wireless Access Point
Configuring LAN Settings
If you selected "Router" as the AP mode (see
19), the LAN Settings section appears at the bottom of the Basic Settings screen.
Figure 2-9
To configure the LAN settings:
1.
Specify the fields as explained in
most users and situations.
Table 2-4. LAN Settings
Field
Description
LAN IP
The LAN IP address of the wireless access point
LAN Subnet Mask The LAN subnet mask of the wireless access point. Combined with the LAN IP
address, the LAN subnet mask enables a device to determine which other
addresses are local to it, and which must be reached through a gateway.
"Configuring Basic System Settings" on page
Table
2-4, or use the default values, which work for
.
| 23