Table of Contents
Advertisement
Bell105sysGB-FIN_FM.book Page 10 Wednesday, April 19, 2000 11:13 AM
User Tools (System Settings)
Settings You can Change with the User
Tools
1
Reference
Regarding how to access the user tools, see ⇒ P.5 "Accessing User Tools (Sys-
tem Settings)".
General Features
Menu
Function Priority
Panel Tone
Ready Panel Tone
Copy Count Display
10
Description
You can specify the mode that is displayed when the oper-
ation switch is turned on or System Reset is activated.
Note
Default: Copier
Reference
See "System Reset"⇒ P.10 "General Features".
A tone sounds when a key is pressed. You can turn the tone
on or off . You can also select the volume level from Low,
Medium, and High.
Note
Default: On (volume: Medium)
You can specify whether to sound the tone when the ma-
chine becomes ready for copying after Energy Saver mode
is deactivated or the power is turned on.
Note
When the "Panel Tone" is set to OFF, the tone does not
sound even if the "Ready Panel Tone" is set to ON.
Default: On
You can set the copy counter to show the number of copies
in the current job made so far (count up) or the number of
copies to be made (count down).
Note
Default: Up (count up)
Advertisement
Table of Contents
