Intermec 6220 Technical Reference page 43

SECTION 4
Updating Flash Using a 4 MB SRAM Card
Prerequisites
"
"
"
"
"
Procedure to Build IFL SRAM Card
" NOTE:
It is possible for verify to fail even though the write operation succeeded. If that happens,
use the CRC32 program on all the individual files and check the results against what is
shown in the RELNOTES.TXT file.
" NOTE:
Do not use the DOS COPY or XCOPY command to create the IFL card. Master mode boot-
ing requires certain files at specific locations on the SRAM card. DD.EXE places every byte
in a specific location on the media; the DOS commands do not attempt to place files in the
same locations from one media to another.
Procedure to Reflash with an IFL Card
C:
CD C:\
MD \6220FLSH
CD \6220FLSH
..\230125-3
FORMAT /U d:
DD 6220FL2A.IFL d:
CD ..
DELTREE 6220FLSH
6220 Hand-Held Computer Technical Reference
System Information
4-5