Intermec 6220 Technical Reference page 25

SECTION 2
PC Card Services
DEVICE=NORMOD.SYS [–A] [–Bd] [–Cx] [–Dx x x] [–Ix] [–Nname] [–R] [–S] [–V]
EXAMPLE: –B610 sets the cut off at 610 millivolts.
EXAMPLE: –C4 defines using COM4 instead of COM3.
EXAMPLE: "/D 16b 21 20" sets timeout to 20h tics, about 1.8 seconds. The "16b 21" identifies the
Ericsson PIA radio.
EXAMPLE: –I7 uses IRQ 7 instead of IRQ 5.
EXAMPLE: –Ncom4 sets the device name to COM4 instead of MODEM. Nname can be any valid
8-character name. However, do not use a name that is the same as the root name of any
other current or future existing file or directory. Once a device name is defined, any files or
directories with the same root name cannot be accessed.
6220 Hand-Held Computer Technical Reference
DOS Device Drivers
2-11