Healthrider RC150 HREX04980 User Manual page 8

7. Attach the Seat Carriage (11) to the Seat Frame
(27) using four Zinc M8 x 40mm Carriage Bolts (82),
four 5/16Ó Black Flat Washers (57), and four M8
Nylon Locknuts (56).
Note: The four Zinc M8 x 40mm Carriage Bolts
(82) used in this step are packaged separately
from the other hardware. The four black M8 x
40mm Carriage Bolts (24) contained in the hard-
ware pack should be discarded.
8. Attach the Seat (7) to the Seat Frame (27) with four
1/4Ó x 5/8Ó Hex Screws (29) and four 5/16Ó Black
Flat Washers (57).
9. Attach the Backrest (13) to the Seat Frame (27)
with four 1/4Ó x 1 1/2Ó Hex Screws (73) and four
5/16Ó Black Flat Washers (57).
7
11
57
56
8
7
57
9
13
8
82
27
57
56
57
29
27
57
57
27
73
73