Honeywell Galaxy Dimension User Manual page 37

PIN + ent
45 = TIMER CONTROL
[ent] to Select
[ent] to Select
2=Holidays
[ent] to Select
1=Modify Dates
01:START >DD/MM
01: END DD/MM
PIN + ent
45 = TIMER CONTROL
[ent] to Select
[ent] to Select
2=Holidays
[ent] to Select
2=Assign groups
STATUS A12345678
Groups
YNYYYYYN
2=Holidays
This function allows up to 32 holiday periods to be allocated. A Start
and End date is entered for each holiday period using the 1=Modify
Dates option. On selecting this option, the Start and End dates for holi-
day period 01are displayed. If no dates have been entered for this pe-
riod, then the display will show **/**. To program the Start date, press
the ent key; the date display changes to >DD/MM< ; enter a valid 4 digit
number and press the ent key to accept the selection. The year is not
required, only the day and month.
Press the # key to move to the End date and follow the procedure for
programming the Start date.
To remove a programmed date, press the * key. The date display returns
to **/**.
NOTE:The holiday periods can only be pro-
grammed by managers and engineers
The groups that are affected by the programmed holiday period are
assigned using the 2=Assign groups function.
On selecting the Assign Groups option, the groups currently assigned
to the programmed holiday periods are indicated by a Y below the group;
an N is displayed below the unassigned groups. All groups default to Y.
Pressing the group number toggles the group status. When the required
groups have been assigned to the holidays, press the ent key to accept
the programming and return to the previous menu level.
NOTE: The larger Galaxy systems have more than 8
groups; these are displayed on the keypad in blocks of
eight groups. Press A or B keys to display each of the
group blocks.
29