Setting The System; Before Setting; Entering A Pin - User Type 2.1 - 2.2; Entering A Pin - User Type 2.3 - 3.6 - Honeywell Galaxy Dimension User Manual

SETTING THE SYSTEM

Code + A
Code + ent
TIMED SET
Code + A
SET A12345678
Groups UUU-----
1
SET A12345678
Groups SUU-----
ent
TIMED SET
Code + A
SET A12345678
Groups USS-----
A Key
SET B12345678
Groups USS-----
ent
TIMED SET

Before Setting

Before setting the system ensure all doors and windows are secured
and areas protected by movement detectors are free from obstruction.
120

Entering A Pin - User Type 2.1 - 2.2

As each digit is entered the keypad responds with a bleep and displays
a *. When all the digits are entered, press the ent or A > key to start the
setting routine.

Entering A Pin - User Type 2.3 - 3.6

As each digit is entered the keypad responds with a bleep and displays
a *. When all the digits are entered press the A > key to start the setting
routine.

Setting groups

Where group choice has been assigned to the PIN, select which groups
have to set as part of the setting routine. The set status of each group is
displayed on the keypad screen. Possible status options are :-
R = Ready (Groups is unset, and all zones are closed)
F = Faulted (Group is unset, and at least one zone is open)
S = Set (Group is set)
L = Lockout (Group is locked out, and cannot be unset)
120
Select which groups have to be to set by entering the number of the
group. For example, to set groups 2 and 3 press keys 2 and 3 . The
display changes to indicate the groups selected for setting. Pressing
the ent key starts the setting routine for the specified groups.
The larger Galaxy systems have more than 8 groups. If the user has
group choice, the available groups will be displayed at the keypad
following a valid code + A >. The groups will be displayed showing
A1 to A8. Use both A > and < B keys to scroll to the various sets of
groups. If the user does not have group choice, entering the PIN and
A > will cause all groups assigned to the user to set.

Exit time

If all the system zones are closed when the setting routine is started,
the display indicates the remaining time, in seconds, to vacate the
60 premises. Exit the building using the agreed route.
5