Table of Contents
Advertisement
8. PLAYBACK MODE
8-1 Playback Procedure
2.
OPERATE/WARNING
LIGHT
RESET
ON
OFF
MONITOR
FILTER
SELECT
COUNTER
1 3200k
CTL
ALARM
TC
2 5600k+1/8ND
UB
3 5600k
4 5600k+1/64ND
SHUTTER
STATUS
MONITOR
C C
MENU
CH-1
AUDIO
CH-2
LEVEL
AUTO IRIS
FULL AUTO BLACK
LOLUX
BACK L
STRETCH
NORMAL
NORMAL
SPOT L
COMPRESS
NG
POWER
ON
OFF
1.
POWER switch
Operation
1.
Set the POWER switch to ON.
2.
Load the recorded videocassette correctly.
• Slide the EJECT switch to the side. When the cassette
cover opens, insert the videocassette and then close the
cassette cover again.
When a recordable videocassette (with the switch on the
back of the cassette set to REC) is loaded, the unit enters
the record-pause mode (STBY mode).
In this case, press the STOP button to release the record-
pause mode.
3.
Press the PLAY button.
a
The PLAY indicator lights and playback starts.
• During playback of a recording made in the WIDE (16:9
picture) mode, the "WIDE" indicator is displayed in the
counter display. The "WIDE" indicator is not shown if the
recording was made in the NORMAL (4:3 picture) mode.
CH 1
OVER
AUTO OFF DEW
40 30
20
10
0 dB
SERVO
RF
L i
CH 2
OVER
32k
48k
SLAVE
PB
HOLD
AUD LOCK
SP
WIDE
MENU
H
M
S
F
"WIDE" indicator
4.
Press the STILL button to stop playback temporarily.
a The STILL indicator lights and the unit enters the
still mode.
5.
To re-start playback, press the PLAY button.
a The STILL indicator goes out and playback starts
again.
6.
To stop playback, press the STOP button.
a The PLAY indicator goes out and the unit enters
the stop mode.
E-54
2.
EJECT switch
EJECT
LOG
REW
STOP
FF
PLAY
STILL
6.
4.
STOP button
STILL button
3.
PLAY button
5.
CAUTION:
• When the still picture mode or stop mode has continued
for about 30 minutes, the unit automatically switches to
the save mode to protect the tape.
The time until the tape protect mode is initiated can be
set to 3 or 30 minutes with the VCR Setup Menu item
No. 307 LONG PAUSE TIME.
When used in a cold environment, the setting will be 3
minutes regardless of the setting on the VCR Setup
Menu.
• Noise may appear in the picture during still mode.
• When the automatic tracking function is activated at the
start of the playback mode, digital noise may appear on
the playback image.
• This unit does not allow manual tracking adjustment.
• When playing back a tape recorded on another unit,
digital noise may appear during playback.
• Following the loading, the built-in head cleaner will emit
a sound while operating. This does not indicate a
malfunction.
Memo:
• If a tape recorded in the WIDE mode is played back on a
4:3 aspect ratio monitor TV, it is displayed as a squeezed
image (stretched vertically).
Playback of tape recorded
in WIDE mode
4:3 aspect ratio monitor 16:9 aspect ratio monitor
• When playing back a tape that is recorded in the WIDE
mode, an ID signal for identifying the WIDE screen mode
is output via the Y/C OUT connector superimposed on
video signal.
8-2 Fast-Forward, Rewind
OPERATE/WARNING
LIGHT
RESET
ON
OFF
MONITOR
FILTER
SELECT
COUNTER
CTL
1 3200k
ALARM
TC
2 5600k+1/8ND
UB
3 5600k
4 5600k+1/64ND
SHUTTER
STATUS
MONITOR
C C
MENU
CH-1
AUDIO
CH-2
LEVEL
AUTO IRIS
FULL AUTO BLACK
LOLUX
BACK L
STRETCH
NORMAL
NORMAL
SPOT L
COMPRESS
POWER
NG
ON
OFF
Press the FF button in stop mode to fast forward the tape.
Press the REW button in stop mode to rewind the tape.
Press the STOP button to stop fast forwarding or rewinding.
8-3 Search
OPERATE/WARNING
LIGHT
RESET
ON
OFF
MONITOR
FILTER
SELECT
COUNTER
CTL
1 3200k
ALARM
TC
2 5600k+1/8ND
UB
3 5600k
4 5600k+1/64ND
SHUTTER
STATUS
MONITOR
C C
MENU
CH-1
AUDIO
CH-2
LEVEL
AUTO IRIS
FULL AUTO BLACK
LOLUX
BACK L
STRETCH
NORMAL
NORMAL
SPOT L
COMPRESS
NG
POWER
ON
OFF
Press the FF button in play mode to search the tape in the
forward direction at about 10 times the normal speed.
• Press the REW button in play mode to search the tape in
the reverse direction at about 10 times the normal speed.
Press the PLAY button to resume normal playback.
Press the STOP button to stop.
8. PLAYBACK MODE
REW button FF button
LOG
REW
STOP
FF
PLAY
STILL
STOP button
• When the tape approaches the end during fast forwarding
or rewinding, the tape speed decelerates to protect the
tape.
• The time required for fast forwarding and rewinding may
become longer when used in a cold environment. This is
not a malfunction.
REW button FF button
LOG
REW
STOP
FF
PLAY
STILL
STOP button PLAY button
• In the case of a tape recorded in the WIDE (16:9 picture)
mode, the "WIDE" indicator is displayed in the counter
display during search.
• The audio is reproduced during the search.
• Video noise may be observed or the image may become
unstable during the search, but this is not a malfunction.
E-55
Advertisement
Table of Contents
