Default Device Settings - movistar RTA01N User Manual

Wireless ADSL Router RTA01N User's Manual
WARNING
Option
LINE Port IP Unnumbered interface:
Address
192.168.1.1
Subnet mask:
255.255.255.255
LAN Port Assigned static IP address:
IP Address
192.168.1.1
Subnet mask:
255.255.255.0
DHCP (Dynamic DHCP server enabled with the
Host Configuration following pool of addresses:
Protocol)
192.168.1.33
through
192.168.1.254
NAT (Network NAT enabled
Address Translation)
If the LEDs illuminate as expected, test your Internet connection
from a LAN computer. To do this, open your web browser, and
type the URL of any external website (such as
http://www.yahoo.com). The LED labeled INTERNET should
blink rapidly and then appear solid as the device connects to the
site.
If the LEDs do not illuminate as expected, you may need to
configure your Internet access settings using the information
provided by your ISP. For details, see Internet Access. If the
LEDs still do not illuminate as expected or the web page is not
displayed, see Troubleshooting Suggestions or contact your
ISP for assistance.

Default device settings

In addition to handling the DSL connection to your ISP, the DSL
Modem can provide a variety of services to your network. The
device is preconfigured with default settings for use with a
typical home or small office network.
The table below lists some of the most important default
settings; these and other features are described fully in the
subsequent chapters. If you are familiar with network
configuration, review these settings to verify that they meet the
needs of your network. Follow the instructions to change them if
necessary. If you are unfamiliar with these settings, try using the
device without modification, or contact your ISP for assistance.
We strongly recommend that you contact your ISP prior to
changing the default configuration.
Default Setting Explanation/Instructions
This is the temporary public IP address of the WAN
port on the device. It is an unnumbered interface that
is replaced as soon as your ISP assigns a 'real' IP
address. See Internet Access.
This is the IP address of the LAN port on the device.
The LAN port connects the device to your Ethernet
network. Typically, you will not need to change this
address. See LAN.
The Wireless ADSL Router RTA01N maintains a pool
of private IP addresses for dynamic assignment to
your LAN computers. To use this service, you must
have set up your computers to accept IP information
dynamically, as described in Services -> DHCP
Settings.
Your computers' private IP addresses (see DHCP
above) will be translated to your public IP address
whenever the PCs access the Internet. See Services
-> Firewall.
42