movistar RTA01N User Manual page 139

User's Guide
Fields on the Description
first setting
block
Enabled/Disabled Radio buttons to enable/disable the interface group
feature. If disabled, all interfaces belong to the default
group.
Interface groups To manipulate a mapping group:
1.Select a group from the table.
2.Select interfaces from the available/grouped
interface list and add it to the grouped/available
interface list using the arrow buttons to manipulate the
required mapping of the ports.
3.Click "Apply Changes" button to save the changes.
Function Description
buttons
Apply Changes Save SNMP configuration. New configuration will take
effect after saving into flash memory and rebooting the
system. See section "Admin" for details.
Configuring your Computers
139