User's Guide
26
Bridge Setting
You can enable/disable Spanning Tree Protocol and set MAC
address aging time in this page.
Bridge Setting
1. From the head Advance menu, click on Others. The
following page is displayed:
Fields on the
Description
first setting
block
Ageing Time
Set the Ethernet address ageing time, in seconds.
After [Ageing Time] seconds of not having seen a
frame coming from a certain address, the bridge will
time out (delete) that address from Forwarding
DataBase (fdb).
802.1d Spanning
Enable/disable the spanning tree protocol
Tree
Function
Description
buttons
Apply Changes
Save this bridge configuration. New configuration will
take effect after saving into flash memory and
rebooting the system. See section "Admin" for details.
Show MACs
List MAC address in forwarding table.
Configuring your Computers
140