Ping - movistar RTA01N User Manual

User's Guide
48
Diagnostic
The DSL device supports some useful diagnostic tools.

Ping

Once you have your DSL device configured, it is a good idea to
make sure you can ping the network. A ping command sends a
message to the host you specify. If the host receives the
message, it sends messages in reply. To use it, you must know
the IP address of the host you are trying to communicate with
and enter the IP address in the Host Address field. Click Go! To
start the ping command, the ping result will then be shown in
this page.
1. From the head Maintenance menu, click on Diagnostic ->
Ping. The following page is displayed:
Fields Description
Host The IP address you want to ping.
Function Description
buttons
PING To start the ping command
2. Type the IP Address in the Host field.
3. Click Ping
Configuring your Computers
188