Installation & Setup - movistar RTA01N User Manual

Wireless ADSL Router RTA01N User's Manual
Follow each STEP carefully and only go to the next step once you have complete the
previous STEP.
Connection of Wireless ADSL Router RTA01N
If you have a PSTN telephone line (normal analog line) connect the router as shown
below:
1. Connect the supplied RJ45 Ethernet cable from your PC's Ethernet port to the Wireless
ADSL Router RTA01N's LAN Port.
2. Connect the supplied RJ11 telephone cable from your home's telephone jack to the
"LINE" port of the supplied splitter. Connect the other supplied RJ11 telephone cable to
the "DSL" port of the splitter and connect the other end of this cable to the "LINE" port of
your Wireless ADSL Router RTA01N. (If there is no option Splitter, please connect the
supplied RJ11 telephone cable from your home's telephone jack to the "LINE" port of your
Wireless ADSL Router RTA01N.)
3. Connect a RJ11 telephone cable to the "PHONE" port of the splitter and connect the other
end to your telephone.
4. Connect the power adapter to the power inlet "POWER" of the Wireless ADSL Router
RTA01N and turn the "ON/OFF SWITCH" switch of your Wireless ADSL Router RTA01N
on.
Installation & Setup
10