Computer Setup Menus - HP ProBook 6545b Maintenance And Service Manual

Computer Setup menus

The menu tables in this section provide an overview of Computer Setup options.
✎
Some of the Computer Setup menu items listed in this chapter may not be supported by your computer.
File menu
Select
System Information
Set System Date and Time
System Diagnostics
Reset BIOS security to factory default
Restore defaults
Ignore changes and exit
Save changes and exit
Maintenance and Service Guide
To do this
■ View identification information for the computer and the
batteries in the system.
■ View specification information for the processor, cache and
memory size, system ROM, video revision, and keyboard
controller version.
Set or change the date and time on the computer.
Displays the following information:
■ System Information
❐ Identification information for the computer and the
batteries in the system
❐ Specification information for the processor, cache and
memory size, system ROM, video revision, and
keyboard controller version
■ Start-up Test—Verifies the system components needed for
starting the computer.
■ Run-In Test—Runs a comprehensive check on system
memory.
■ Hard Disk Test—Runs a comprehensive self-test on any
hard drive in the system.
■ Memory Test—Runs a comprehensive test on any memory
installed in the computer.
■ Battery Test—Runs a comprehensive test on any batteries
installed in the computer.
■ Error Log—Displays a log file if any errors have occurred.
Restore the BIOS security settings to the factory default.
Replace the configuration settings in Computer Setup with
the original factory settings. (Hard drive mode, password
settings, and security settings are not changed when you
restore the factory settings.)
Cancel any changes entered during the current session.
Then exit and restart the computer.
Save any changes entered during the current session.
Then exit and restart the computer. Your changes go into
effect when the computer restarts.
Computer Setup
5–15