Restoring Factory Settings In Computer Setup; Computer Setup Menus - HP EliteBook 2740p User Manual

To exit Computer Setup menus, choose one of the following methods:
●
To exit Computer Setup menus without saving your changes, click the Exit icon in the lower-left
corner of the screen, and then follow the on-screen instructions.
– or –
Use the tab key and the arrow keys to select File > Ignore Changes and Exit, and then press
enter.
– or –
●
To save your changes and exit Computer Setup menus, click the Save icon in the lower-left
corner of the screen, and then follow the on-screen instructions.
– or –
Use the tab key and the arrow keys to select File > Save Changes and Exit, and then press
enter.
Your changes go into effect when the computer restarts.

Restoring factory settings in Computer Setup

NOTE:
To return all settings in Computer Setup to the values that were set at the factory, follow these steps:
1. Turn on or restart the computer, and then press
Menu" message is displayed at the bottom of the screen.
2. Press
3. Use a pointing device or the arrow keys to select File > Restore Defaults.
4. Follow the on-screen instructions.
5. To save your changes and exit, click the Save icon in the lower-left corner of the screen, and
then follow the on-screen instructions.
– or –
Use the arrow keys to select File > Save Changes and Exit, and then press enter.
Your changes go into effect when the computer restarts.
NOTE:
settings.

Computer Setup menus

The menu tables in this section provide an overview of Computer Setup options.
NOTE:
your computer.
Downloaded from LpManual.com Manuals
Restoring defaults will not change the hard drive mode.
f10 to enter BIOS Setup.
Your password settings and security settings are not changed when you restore the factory
Some of the Computer Setup menu items listed in this chapter may not be supported by
esc while the "Press the ESC key for Startup
Computer Setup menus 135