Dimension Digital Controller; Front Panel Layout; Dimension Digital Controller Front Panel - Runco LightStyle LS-12HBd Installation & Operation Manual

System Overview
2.3
DC-300 Dimension
Digital Controller

Front Panel Layout

1
Figure 2-5. Dimension Digital Controller Front Panel
The Dimension Digital Controller provides "left-eye" and "right-eye" video signals and the
OSD menu to the projector. It controls the other system components in response to user
input via the following interfaces:
• Front-panel keypad
• IR remote control unit
• HDMI CEC messages
• RS-232 serial commands
• Ethernet
Figure 2-5 shows the controls and indicators on the Dimension Digital Controller front
panel; the paragraphs that follow describe them.
LS-12HBd
16:9/1
2 3
1. RUNCO ICON
Lights blue to indicate that the controller is on or powering up.
2. IR SENSOR
Receives IR commands from the remote control.
3. VACUUM FLUORESCENT DISPLAY
Can be used instead of the On-Screen Display (OSD). Displays currently-selected
menu or – if no menu is selected – the connected display device model, current
source, input resolution and aspect ratio/screen.
4. ON/STANDBY BUTTON
Press once to toggle from standby mode to on mode. Press it again to return to
standby mode. For a discrete on or off command, you can use the direct access
buttons on the remote control.
5. LEFT BUTTON
Used to direct-select inputs or move the menu cursor left in the OSD. When no menu
is present on-screen, the LEFT button toggles through the different sources, in this
order:
DisplayPort - HDMI 8 - HDMI 7 - HDMI 6 - HDMI 5 - HDMI 4 - HDMI 3 - HDMI 2 -
HDMI 1 - SCART - HD 2 - HD 1 - Component - Composite 3 - Composite 2 -
Composite 1
standby
HDMI 1
1080i/60
4
10
11 10 9
m
e
n
u
5 6 7 8
LightStyle™ LS-12HBd Installation/Operation Manual