Specifications; Ls-12Hbd Projector Specifications - Runco LightStyle LS-12HBd Installation & Operation Manual

Table 7-1 lists the LS-12HBd projector specifications.
Table 7-1. LS-12HBd Projector Specifications
Projector Type:
Native Resolution:
Estimated Lamp Life:
Aspect Ratios:
DTV Compatibility:
Picture Size (16:9 Screen):
Processing:
Control Options:
Inputs and Outputs:
Video Standards:
Calibration:
Throw Distance
(Factor x Screen Width):
Horizontal & Vertical Offset:
Light Output (2D):
Contrast Ratio:
Illumination System:
LightStyle™ LS-12HBd Installation/Operation Manual
Digital Light Processing™ (DLP), 3-chip, 16:9 SuperOnyx™
DMD™
Full HD 1920 x 1080 (1080p)
2000 hours, typical (260W power setting)
3000 hours, typical (230W power setting)
4:3, Letterbox, 16:9, VirtualWide, Cinema, Virtual Cinema,
Native
Refer to Table 7-2
Recommended Width: 80 - 117 in.
Maximum Width: 175 in.
Runco Dimension Digital Controller with ViVix IV™ technology
and BRiC (Backup, Recovery and Clone) tool
• Serial commands via RS-232
• Discrete infrared (IR) remote
• Consumer Electronics Control (CEC) protocol support via
HDMI
• Ethernet
• Digital Video x 2 (from Dimension Digital Controller)
• RS-232 (female DB9) for serial communications
• 3D Sync Out (female 3-pin, VESA standard mini-DIN) to IR
Emitter
NTSC, PAL, SECAM, CEA-861D
ISF Certified Calibration Configuration
Refer to Table 3-3
Proteus 1: None
Proteus 2, 3, 4, 5, 6:
Horizontal: 30% of screen width left or right
Vertical: 65% of screen height up or down
CSMS Specifications* – Home Theater Calibration:
2,592 ANSI Lumens; 94 Foot-Lamberts (fL)
Uncalibrated: 3,780 ANSI Lumens
*Measured on a 1.0 gain, 84" wide 16:9 screen
CSMS Contrast Ratio: >250:1 (ANSI);
10,000:1 full-on, full-off
230W HPM lamp

7. Specifications

125
Specifications
7.1
LS-12HBd Projector
Specifications