Runco LightStyle LS-12HBd Installation & Operation Manual page 45

Attaching the Transport Assembly Attachment Plate:
1. Place the projector upside down on a blanket or other soft surface.
2. Position the attachment plate as shown here.
Attachment Points
for Security Hooks
for Transport Assembly Attachment Plate
3. If you are mounting the projector on a ceiling: Line up the holes on the Ceiling
Mount Plate (included with the projector ceiling mount kit) with those on the bottom of
the projector and attachment plate.
4. Secure the Transport Assembly Attachment Plate and Ceiling Mount Plate to the
projector using the hardware provided with the attachment plate, as shown.
LightStyle™ LS-12HBd Installation/Operation Manual
Attachment Points
and Ceiling Mount Plate
29
Installation