Ip Arp Max-Retries - Supermicro Intelligent Switch User Manual

18.9 ip arp max-retries

This command sets the maximum number of ARP request retries. The no form of the command sets the
maximum number of ARP request retries to its default value.
ip arp max-retries <value (2-10)>
no ip arp max-retries
Mode
Global Configuration Mode
Defaults
3
Example
smis(config)# ip arp max-retries 2
The command configures the maximum number of ARP requests that the switch will generate before
deleting an un-resolved ARP entry.
Related Command
show ip arp – Displays IP ARP table for the given VLAN ID/IP Address of ARP entry/MAC Address of
ARP entry/IP ARP summary table/ARP configuration information
Release : 461 / 913
1.0