Screen Rotation; Swivel - LaCie 500 Series User Manual

LaCie 500 Series LCD Monitor
User Manual

3.1.3. Screen rotation

■
Before rotating, the screen must be raised to the
highest level to avoid knocking the screen on the desk
or pinching with your fingers.
To raise the screen, place your hands on each side
of the monitor and lift up to the highest position (page
13, figure B).
To rotate the screen, place hands on each side of the
monitor screen and turn clockwise from Landscape to
Portrait or counterclockwise from Portrait to Landscape
(Figures D and E).
To rotate the OSD menu between landscape and
portrait, refer to "Controls" section.

3.1.4. Swivel

■
Grasp both sides of the monitor screen with your hands
and adjust the swivel as desired (Figure F).
Figure D
Using Your LaCie Monitor
Mac Users
Portrait mode requires a high end graphic board
such as the ATI Radeon x800 or internal ATI graphic
chip.
PC Users
To get the full benefit from portrait mode, LaCie
recommends using PivotPro software from Portrait
www.portrait.com
Displays:
Figure F
page 
Figure E
.