LaCie 119 Monitor How To Use This Manual User’s Manual How To Use This Manual In the toolbar: Previous Page / Next Page Go to Contents Page / Go to Precautions Page Printing: While optimized for onscreen viewing, the pages of this manual are formatted for printing on 8 ”...
1. Introduction 2. Your LaCie 119 Monitor 2.1 Package Contents 2.2 Rear View 3. Setting up Your LaCie 119 Monitor 3.1. Height, Tilt, Pivot and Swivel Adjustment 4. External Controls 5. How to Adjust a Setting 5.1. Descriptions for function control LEDs 6.
LaCie assumes no liability resulting from errors or omissions in this document, or from the use of the information contained herein. LaCie reserves the right to make changes or revisions in the product design or the product manual without reservation and without obligation to notify any person of such revisions and changes.
Page 4
C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CSA C22.2 No. 60950-1. FCC Information Use the attached specified cables with the LaCie 119 color monitor so as not to interfere with radio and television reception.
Page 5
LaCie 119 Monitor Foreword User’s Manual page 5 Congratulations! You have just purchased a TCO’99 the manufacturer is obliged to have an envi- approved and labeled product! Your choice has provided you ronmental plan which must be adhered to in with a product developed for professional use.
Page 6
LaCie 119 Monitor Foreword User’s Manual page 6 Cadmium** Cadmium is present in rechargeable batteries and in the colour generating layers of certain computer displays. Cadmium damages the nervous system and is toxic in high doses. TCO’99 requirement states that batteries, the colourgenerating layers of display screens and the electrical or electronics components must not contain any cadmium.
• Operating temperature 0° - 35°C, 32° - 96°F, storage temperature -20° - 60°C, -4° - 140°F • Operating humidity 10% to 85% Caution! The LaCie 119 Monitor's warranty may be void as a result of the failure to respect the precautions listed above.
LaCie 119 Monitor Notes User’s Manual page 8 GENERAL NOTES The screen surface is very soft. Do not rub, touch or tap the screen surface with sharp object such as pen or pencil. This con- tact may scratch or damage the screen. These damages are not covered under the warranty.
User’s Manual page 9 1. Introduction Thank you for choosing the LaCie 119 monitor. We hope you'll be pleased by your purchase. Your LaCie 119 presents an ideal combination of high 1000:1 contrast and 250 cd/m2 maximum brightness for your viewing comfort.
3. Using Your LaCie 119 Monitor User’s Manual page 12 3. Setting Up Your LaCie 119 Monitor 3.1. Height, Tilt, and Swivel Adjustment For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor's angle to your own preference.
LaCie 119 Monitor 4. External Controls User’s Manual page 13 4. External Controls AUTO - When OSD menu is in active status, this button will act as EXIT-KEY (EXIT OSD menu) or go back to the previous menu. When OSD menu is in off status, press this button for 2 seconds to activate the Auto Adjustment function.
LaCie 119 Monitor 5. How to Adjust a Setting User’s Manual page 14 5. How To Adjust a Setting 1. Press the MENU-button to activate the OSD window. 2. Press to navigate through the functions. Once the desired function is highlighted, press the MENU- button to activate it.
Page 15
LaCie 119 Monitor 5. How to Adjust a Setting User’s Manual page 15 Main Menu Item Sub Menu Item Description Color Temp. Warm Recall Warm Color Temperature from EEPROM Cool Recall Cool Color Temperature from EEPROM USER/red Red Gain from Digital-register.
LaCie 119 Monitor 6. Troubleshooting User’s Manual page 16 6. Troubleshooting The Problem Possible Solutions Power LED not on • Make sure power switch is in ON position. • Check power cord connections. No Plug & Play • Check if PC system is Plug & Play •...
Page 17
LaCie 119 Monitor 6. Troubleshooting User’s Manual page 17 The Problem Possible Solutions ERROR MESSAGE: Cable • Make sure signal cable is properly connected. If loose, tighten screws. not Connected • Check signal cable connection pins for damage. ERROR MESSAGE: Input Your computer has been set to an unsuitable display mode.
1) Read the manuals and review the Troubleshooting section. If you have asked yourself all of the pertinent questions in the troubleshooting checklist, and you still can't get your LaCie monitor to work properly, contact us via the provided Web link. Before contacting us, make sure that you are in front of your computer and that you have the following information on hand: •...
Page 21
LaCie 119 Monitor 9. Contacting Customer Support User’s Manual page 21 LaCie Technical Support LaCie Asia, Singapore and Hong Kong LaCie Australia Contact Us At: Contact Us At: http://www.lacie.com/asia/contact http://www.lacie.com/au/contact/ LaCie Belgium LaCie Canada Contact Us At: Contact Us At: http://www.lacie.com/be/contact/...
LaCie warrants your LaCie 119 Monitor against any defect in material and workmanship, under normal use. In the event this product is found to be defective within the warranty period, LaCie will, at its option, repair or replace the defective LaCie 119 Monitor.
Need help?
Do you have a question about the 130705 - 119 With LaFrame and is the answer not in the manual?
Questions and answers