Osd Warnings; Advanced Menu Functions - LaCie 500 Series User Manual

LaCie 500 Series LCD Monitor
User Manual

4.8. OSD Warnings

Explanation
OSD Warning menus disappear with EXIT button.
NO SIGNAL
This function gives a warning when there is no Horizontal or Vertical Sync. After power is turned on or when there is a
change of input signal, the No Signal window will appear.
RESOLUTION NOTIFIER
This function gives a warning of use with optimized resolution. After power is turned on or when there is a change of
input signal or the video signal doesn't have proper resolution, the Resolution Notifier window will open.
OUT OF RANGE
This function gives a recommendation of the optimized resolution and refresh rate. After the power is turned on or there
is a change of input signal or the video signal doesn't have proper timing, the Out Of Range menu will appear.
PORTRAIT WARNING
When the monitor is used in the portrait position, the brightness value will be reduced to 300 cd/m
Warning is ON, a message will appear on the screen for 10 seconds.
LUMINANCE WARNING
When the backlight cannot display the desired luminance, a message will appear on the display. To avoid this, reduce the
BRIGHTNESS level or set the AUTO LUMINANCE function to OFF (page 27, TAG1).

4.9. Advanced Menu Functions

To access the advanced menu:
1. Turn off your monitor.
2. Turn on your monitor by pushing the POWER
and SELECT button simultaneously for at least
one second. Then press any of the control buttons
(MENU/EXIT, LEFT, RIGHT, UP, DOWN).
3. You will see the Advanced menu. This menu is larger
than the normal OSD.
OSD Control Button Functions
Technical noTe:
the DVI SELECTION, to change the IPM or to
change the HDCP CONTENT settings while the
"NO SIGNAL" or "OUT OF RANGE" messages
are displayed.
4. To make an adjustment, ensure that the tag is high-
lighted, then press SELECT. To move to another
tag, press EXIT , then press LEFT or RIGHT to
highlight another tag.
To exit the advanced menu turn off and restart your
monitor in the normal way.
page 
. If the Portrait
2
It is possible to change