Installing Your Lacie 500 Series Lcd Monitor - LaCie 500 Series User Manual

LaCie 500 Series LCD Monitor
User Manual

2. Installing Your LaCie 500 Series LCD Monitor

Figure A
To attach the LCD monitor to your system, follow
these instructions:
1. Turn off the power to your computer.
2. For the PC or MAC with DVI digital output:
Connect the DVI signal cable to the connector of the
display card in your system (Figure A). Tighten all
screws.
For the PC with Analog output:
Connect the 15-pin mini D-SUB to DVI-A signal
cable to the connector of the display card in your sys-
tem (Figure B).
For the MAC:
Connect the Macintosh cable adapter to the comput-
er, then attach the 15-pin mini D-SUB signal cable to
the Macintosh cable adapter (Figure C).
Installing Your LaCie Monitor
Mac Cable Adaptor
(not included)
Figure B Figure C
TeChNICAl NOTe:
do not require a Macintosh cable adapter.
page 0
Some Macintosh systems