Din-Rail Mounting; Figure 2.6: Installation To Din-Rail Step 1 - Advantech EKI-2725 User Manual

2.3.2

DIN-rail Mounting

You can also mount EKI-2725 on a standard DIN-rail by below steps.
The DIN-rail kit is screwed on the industrial switch when out of factory. If the DIN-rail kit
is not screwed on the industrial switch, please screw the DIN-rail kit on the switch first.
First, hang the EKI-2725 to the DIN-rail with angle of inclination. See figure 2.6.

Figure 2.6: Installation to DIN-rail Step 1

EKI-2725 User Manual 14