Din-Rail Mounting - Advantech EKI-2525I User Manual

2.3.2

DIN-rail Mounting

You can also mount EKI-2525/2525I/2528/2528I on a standard DIN-rail by below steps.
The DIN-rail kit is screwed on the industrial switch when out of factory. If the DIN-rail kit
is not screwed on the industrial switch, please screw the DIN-rail kit on the switch first.
First, hang the EKI-2525/2525I/2528/2528I to the DIN-rail with angle of inclination. See
figure 2.6.
Figure 2.6: Installation to DIN-rail Step 1
EKI-2525_2525I_2528_2528I_Manual_ed4.doc 14