Configure Snmpv3 User Profile - Advantech EKI-6311GN User Manual

Figure 35 SNMP Configuration
Protocol Version
Select the SNMP version, and keep it identical on the EKI-6311GN and the SNMP manager. The
EKI-6311GN supports SNMP v2/v3.
Server Port
Change the server port for a service if needed; however you have to use the same port to use that
service for remote management.
Get Community
Specify the password for the incoming Get and GetNext requests from the management station.
By default, it is set to public and allows all requests.
Set Community
Specify the password for the incoming Set requests from the management station. By default, it is
set to private.
Trap Destination
Specify the IP address of the station to send the SNMP traps to.
Trap Community
Specify the password sent with each trap to the manager. By default, it is set to public and allows
all requests.

Configure SNMPv3 User Profile

For SNMP protocol version 3, you can click "Configure SNMPv3 User Profile" in blue to set the details
of SNMPv3 user. Check "Enable SNMPv3 Admin/User" in advance and make further configuration.
EKI-6311GN-User_Manual V2.1 ƒ‰‡