Wireless Security Settings; Data Encryption And Authentication Settings - Advantech EKI-6311GN User Manual

LAN2LAN CPE
LAN2LAN CPE mode enables packet forwarding at layer 2 level. It is fully transparent for all the
Layer2 protocols.
Space in Meter
To decrease the chances of data retransmission at long distance, the EKI-6311GN can
automatically adjust proper ACK timeout value by specifying distance of the two nodes.
Flow Control
It allows the administrator to specify the incoming and outgoing traffic limit by checking "Enable
Traffic Shaping". This is only available in Router mode.
Note:
We strongly recommend you leave most advanced settings at their defaults except
"Distance in Meters" adjusted the parameter for real distance; any modification on
them may negatively impact the performance of your wireless network.

4.2 Wireless Security Settings

To prevent unauthorized radios from accessing data transmitting over the connectivity, the EKI-
6311GN provides you with rock solid security settings.

Data Encryption and Authentication Settings

Open "Profile Setting" in "Wireless" and enter "VAP Profile 1 Settings" as below.
Figure 7 Security Settings
EKI-6311GN-User_Manual V2.1 ƒ‰‡