Using The External Antenna - Advantech EKI-6311GN User Manual

Using the External Antenna

If you prefer to use the external antenna for your application instead of the built-in directional antenna,
please follow the steps below.
Grab the black rubber on the top of EKI-6311GN, and slightly pull it up. The metal N-type
connector will appear.
Figure 10 Move the Rubber
Connect your antenna with the N-type to RSMA adaptor on the top of EKI-6311GN. The
following picture shows the full set of EKI-6311GN:
Figure 11 Removed the Rubber
EKI-6311GN-User_Manual V2.1
Figure 12 Full set with antenna
ƒ‰‡