Exhaust Filter Changing - Kenmore 116.23205C Use & Care Manual

PIÈCES DÉTACHÉES
Objet Style Nº
Courroie CB-3
Éclairage -----
Sac à poussière C
Filtre d'échappement EF-1
Filtre de securité CF-1
du moteur
PowerMate & Tubes
Tube
Supérieur
Éclairage
Pare-Chocs
Pédale de
Indicateur de
relâchement
hauteur de poils
de manche
Pédale de
hauteur de poils
Numéros de
modèle/série
PowerMate (Au bas)
Nº aux Nº au
Etats-Unis Canadá
20-5218 20-40118
20-5240 20-40601
20-50558 20-50403
20-86889 20-40324
20-86883 20-40321
Tube
Inférieur
Protecteur de surchage
Bouton de remise
en circuit
Pedale de
relâche de
la rallonge
Courroie
Nettoyer de bords
(Non illustré)
6

EXHAUST FILTER CHANGING

The exhaust filter cartridge must be replaced regularly. Replace the filter when the entire
surface area is covered evenly. The filter CANNOT be washed as it will lose its dust
trapping ability.
NOTE: Use replacement exhaust filter No. 20-40324, see part number detail in
REPLACEMENT PARTS (page 7).
WARNING
Fire and/or Electrical Shock Hazard
Do not operate with a clogged exhaust
filter or without the exhaust filter installed.
Do not operate without filter cover
installed.
1. Pull out and down on
the exhaust filter cover
to remove from the
canister and lay aside.
2. Pull the exhaust
Exhaust
filter up and out
Filter
from the rear of
the canister.
3. Replace the
exhaust filter
cartridge.
Place the new
Exhaust
Filter
filter into the
canister with
the foam seal
facing towards
the canister.
4. Replace the
exhaust filter cover
by placing the two
tabs on the filter
cover into the slots
on the canister and
rotate into place
Slots
until it snaps closed.
Tabs
23