Exhaust Filter Changing - Kenmore Elite 116.21814 Use & Care Manual

EXHAUST FILTER CHANGING
,_ WARNING
Fire and/or ElectricalShock Hazard
Do not operate with a clogged exhaust
filter or without the exhaust filter
installed. Do not operate without filter
cover installed.
EXHAUST FILTER - HEPA MEDIA
The exhaust filter cartridge must be
replaced when dirty. Replace the filter
when the entire surface area is covered
evenly. The filter CANNOT be washed as
it will lose its dust trapping ability.
NOTE: See REPLACEMENT PARTSfor part
number detail (page 5).
1. Presslatch to release the exhaust filter
cover from slot in canister.
2. Pullfilter cover outward to remove from
canister.
Filter Latch_.\'_'_'__ _
3. Remove the exhaust filter cartridge.
Exhaust __
Filter----_
4. Insert the exhaust filter cartridge. Place
the new filter into the canister with the
rubber seal towards the canister.
Exhaust
5. To replace the exhaust filter cover place
the two tabs on the filter cover into the
canister.
6. While holding latch clown rotate filter
cover into place.
\
7. Release latch and verify that filter cover
is locked into place.
Push
Here
- 21 -