Motor Safety Filter Changing - Kenmore 116.23205C Use & Care Manual

MOTOR SAFETY FILTER CHANGING

The motor safety filter must be replaced when dirty. It should be replaced regularly
depending on use conditions. The filter CANNOT be washed as it will lose its dust trapping
ability.
NOTE: Use replacement motor safety filter No. 20-40321, see part number detail in
REPLACEMENT PARTS (page 7).
WARNING
Electrical Shock Hazard
Turn off and unplug vacuum cleaner from
electrical outlet. Do not operate the
vacuum cleaner without the motor safety
filter. Be sure the filter is dry and properly
installed to prevent motor failure and/or
electrical shock.
1. Remove the bag
as outlined in the
BAG CHANGING
section (page 21).
2. Lift the rubber
retainer and pull
out motor safety
Rubber
filter as shown.
Retainer
3. Replace the filter,
white side facing
toward dust bag, by
sliding it back into
place under the ribs in
the bag cavity. Tuck
filter in so that it fits
Rubber
completely under the Retainer
rubber retainer.
4. Replace the bag as outlined in the BAG
CHANGING section (page 21).
22
POIGNÉE & TUYAU
Interrupteur à trois positions
(OFF/ Floor / Carpet)
(Arrête/Plancher/Moquette)
Réglage
d'aspiration
Suceur
combiné
TRAÎNEAU
Couvercle du
rangement du
Pet PowerMate
(Pet PowerMate
à l'intérieur)
Outil pour
animaux
Brosse a
domestiques
plancher
Logement de
accessoires
(accessoires
à l'intérieur)
Couvercle du chariot
Loquet de dégagement
Poignée de
transport
Poignée
Suceur Plat
Pivot de tuyau
Pet PowerMate
Bouton de
rebobinage
Couvercle du filtre
d'échappement
(Filtre à l'intérieur)
Cordon
d'alimentation
Filtre (Derrière
le sac à poussière)
Sac à poussière
7