Installation On The Inverter - Omron RX Series User Manual

3 Installation and Wiring
3-1

Installation on the Inverter

This section shows how to install the LCD Digital Operator on the RX, LX and MX2 inverter series.
The installation procedure differs with installation methods. This section describes the following
2 methods.
• Direct installation on the Inverter
• Installation on the Inverter via cable
Section
3-1-1 Direct installation on the Inverter
3-1-2 Installation on the Inverter via
Cable
Precautions for Correct Use Precautions for Correct Use
• Shut off the power supply to the Inverter before installing or removing the LCD Digital
Operator. Not doing so may result in failure.
• The LCD Digital Operator cannot be installed directly on an Inverter that is already mounted
with a Communications Unit.
3 - 2
Title
Describes the procedure for installing the LCD Digital Operator
directly on the Inverter.
Describes the procedure for installing the LCD Digital Operator on
the Inverter via cable in situations where:
• The LCD Digital Operator is installed on the control panel.
• The use of a Communications Unit prevents direct installation
on the Inverter.
Description
LCD Digital Operator User's Manual (I579)