4 Operation Procedures
Function Mode
In this mode, "F to U" group Inverter parameters can be
displayed and set.
The screen shows the parameter number, function name,
parameter data and setting range of the parameter.
Precautions for Correct Use
Precautions for Correct Use
In the Function Mode, "d" group Inverter monitor functions cannot be displayed and set.
Trip Mode
Trip information and warning information are displayed in this
mode.
If a trip or a warning occurs in the Inverter, the trip screen is
displayed from any display mode.
In the Option Mode, Read Mode, and Write Mode, the trip
screen is not displayed even if an Inverter trip or warning
occurs.
The ALARM or WARNING LED lights up.
Read Mode
In this mode, a single set of Inverter parameter settings, or a
single set of parameter settings and a Drive Programming
program, can be all read and stored in the LCD Digital
Operator.
Select a single set or four sets of storage data by 5. R/W
Storage Mode in the OPTION MODE menu.
For details about the Read Mode, refer to Section 6
Read/Write Functions.
4 - 4
Case: 5. R/W Storage Mode = "01 :Single"
Case: 5. R/W Storage Mode = "02: Quad"
LCD Digital Operator User's Manual (I579)