Installation On The Inverter Via Cable; Installation On The Inverter Via Cable (Rx, Lx, Mx2 Models) - Omron RX Series User Manual

3 Installation and Wiring
3-1-2

Installation on the Inverter via Cable (RX, LX, MX2 models)

1
If necessary, mount theLCD Digital
Operator to the panel. Cut out the panel
according to the panel cutout diagram
and, using M3 screws, secure the LCD
Digital Operator to the panel from the
back side.
The recommended torque is 0.9 to 1.0
N·m.
For panel cutout dimensions, refer to
1-4 External Dimensions on page 1-6.
2
Connect the LCD Digital Operator with the
Inverter via cable.
• Recommended cable model:
3G3AX-CAJOP300-EE (Cable length: 3 m)
3 - 4 LCD Digital Operator User's Manual (I579)