Table of Contents
Advertisement
Viewing 3D Images
To view 3D content, you must first connect a 3D-compatible video device to one of the
HDMI ports on your projector. You will also need a pair of EPSON or EPSON-compatible
RF 3D active shutter glasses.
1. Turn on and begin playback on the 3D-compatible video device.
2. Press the
button on the remote control, if necessary.
2D/3D
3. Slide the power switch on your 3D glasses to the
Note: If the glasses don't automatically display 3D content, you may need to pair them with
the projector. Move the glasses within 10 feet (3 m) of the projector, then press and hold the
Pairing button on the 3D glasses for at least 3 seconds. The status light on the glasses will
alternately flash green and red, then remain green for 10 seconds if pairing is successful.
position.
On
Making Basic Adjustments
27
Advertisement
Table of Contents
