Epson PowerLite Home Cinema 3020plus User Manual page 70

■
If the function key doesn't let you display simultaneously on both screens, you might
need to use the Display utility in the Windows Control Panel to make sure that both the
LCD screen and external monitor port are enabled. From the Windows Control Panel,
open the
then click
computer; you may need to click a
port is set as your primary display or enabled. See your computer manual or online help
for details.
If you're using Mac OS X:
1. Open the
2. Select the
3. Click the
4. Check the
The picture is upside-down or reversed.
Change the
Projection
The picture isn't rectangular.
■
If the image looks like
screen and angled toward it. Face the projector straight ahead (instead of at the center of
the screen), then use the horizontal keystone slider to correct the image (see page 23).
■
If the image looks like
use the vertical keystone buttons to adjust the image (see page 23).
The picture contains static or noise.
■
Make sure the
page 53).
■
If you're viewing still images and you notice flickering or horizontal lines, turn on the
Progressive
■
Make sure your cables are securely connected at both ends.
■
If you're using an extension cable, you may pick up interference if the cable is not
adequately shielded. You may need to use a signal amplifier for longer cables.
■
If you're displaying the same image on your computer and projector screen, try turning
off your laptop's LCD display (see page 69).
70
Problem Solving
utility. In the Display Properties dialog box, click the
Display
. The method for adjusting the setting varies from computer to
Advanced
System Preferences
or
VGA Display Color LCD
or
Arrange Arrangement
checkbox. (See your computer manual for details.)
Mirror Displays
setting in the Settings menu (see page 52).
or
or
is set correctly for your connected video equipment (see
Input Signal
setting (see page 42).
tab, then make sure the external Monitor
Monitor
utility and select
Displays
option, if necessary.
tab.
, the projector has been placed off to one side of the
, make sure the projector is not tilted up or down, then
Settings
.
tab,