Epson PowerLite Home Cinema 3020plus User Manual page 71

The picture is blurry.
■
Make sure the
Input Signal
■
There may be dirt on the lens. Clean the lens as described on page 57.
■
Adjust the focus (see page 25).
■
Make sure the lens is not fogged by condensation. If you've just moved the projector from
a cold environment, wait a couple of minutes before using it.
■
Adjust the
Sharpness
■
If you're projecting from a computer, you may need to adjust the
settings (see page 46).
The colors on the screen don't look right.
■
Make sure the
Input Signal
page 53).
■
Press the
Color Mode
page 33).
■
Check that all cables are connected securely.
■
Check the brightness and contrast settings (see page 40).
■
Fine-tune the colors with the settings listed on page 43.
■
If the picture looks dark, you may need to replace the lamp. Check the lamp usage timer
to see how long the lamp has been in use (see page 64). Replace the lamp if it's close to
the end of its service life (see page 61).
is set correctly for your video equipment (see page 53).
setting (see page 42).
is set correctly for your connected video equipment (see
button on the remote control to select a different color mode (see
and
Tracking Sync
Problem Solving
71