Direct Power On; Video Signal; Sleep Mode; Child Lock - Epson PowerLite Home Cinema 3020plus User Manual

■ Direct Power On

Extended > Operation > Direct Power On
Sets projection to start without pressing the P power button on the projector or the
button on the remote control.
Note: When Direct Power On is enabled, power surges that occur after a power outage can
cause the projector to turn on.

■ Video Signal

Extended > Input Signal > Video Signal
Leave this setting on
NTSC or PAL (for standard TV formats).
■ Component
Extended > Input Signal > Component
Change this setting to match the type of equipment connected to the Component port.
For component video, select
or select or
YCbCr
■ Illumination
Extended > Operation > Illumination
Turn off this setting to deactivate the lights on the projector's P power button and power
light. Use this setting if you find the lights distracting in a darkened room.

■ Sleep Mode

Extended > Operation > Sleep Mode
Turn off this setting if you don't want the projector to enter sleep mode. (Sleep mode
shuts the projector off automatically when there is no video signal.)
Select ,
5min. 10min.
conserves power and extends the life of the lamp.
To turn the projector back on, press the Ppower button on the projector or the
button on the remote control.

■ Child Lock

Settings > Lock Setting > Child Lock
Lets you lock the Ppower button on the projector's control panel to make it more
difficult for a child to turn on the projector. See page 37 for more information.
so the projector can automatically interpret the format, such as
Auto
to let the projector automatically interpret the signal;
Auto
to manually select your video equipment's signal.
YPbPr
, or as the length of time before shutoff; decreasing the time
30min.
is the default setting.
30min.
Making Detailed Adjustments
On
On
53