Power Consumption - Epson PowerLite Home Cinema 3020plus User Manual

■ Setup Level
Signal > Advanced > Setup Level
Note: This setting can be used only when an NTSC signal is being input through the Video port,
or when a video signal is being input through the Component video ports.
This setting adjusts the threshold at which dark areas of the image are rendered black
(0 IRE). For compatibility with most DVD and video equipment sold in the United
States, leave this setting at 0%. Check your video equipment's specifications to be sure of
the correct setting.
■ EPSON Super White
Image > Advanced > EPSON Super White
Note: This setting can be used only when the signal is input through the HDMI1 or HDMI2
ports with the Color Mode set to Natural or Cinema (see page 33).
If bright parts of the image are washed out or overexposed (when the input signal
contains values over 100 IRE), turn this setting on to compensate.
■ HDMI Video Range
Signal > Advanced > HDMI Video Range
Note: This setting can be used only when HDMI1 or HDMI2 is selected as the image source
(see page 22). This setting cannot be used when Epson Super White is set to On.
If your video equipment has an HDMI port and you've connected it to the projector
using an HDMI cable, set the level of the projector to match that of the video equipment.

■ Power Consumption

Image > Power Consumption
This setting controls the light output from the projector. On
produces a brighter image and the lamp uses more power. To save power and extend the
life of the lamp, select .
ECO
, the projector
Normal
Making Detailed Adjustments
41