Table of Contents
Advertisement
PREFACE
The Panasonic WJ-MS488 Quad Unit is ideal for CCTV
applications where multiple surveillance cameras are
required. Most 2 : 1 interlace cameras available today,
either color or black and white, are compatible with the
WJ-MS488. Up to eight cameras may be connected to
the system, and if desired, the monitor can be divided
FEATURES
1. Compatible with Most 2 : 1 Interlace cameras
Advanced digital processing technology allows con-
nection of most 2 : 1 interlace cameras available
today without the requirement for synchronization of
the eight video inputs.
The system may be added to existing security sys-
tems and makes possible displays in black and
white or full color.
2. Alphanumeric Character Generator
Title insertion of up to 8 characters in each of the
windows is possible. This promotes easy identifica-
tion of the separate camera locations.
3. Alarm with Built-in Buzzer
Upon receiving an alarm signal, a full-sized camera
picture of the site is displayed. By setting the "CAM
TITLE ON" and "ALARM TITLE ON" modes from the
TITLE SETUP menu, "ALARM" and the camera title
will appear intermittently in the picture.
The Automatic alarm reset time is adjustable from 1
to 30 sec.,1, 2, 3, 4, 5 min. or Off.
4. Multi Picture Borderlines
A borderline can be inserted in the quad or 3x3 pic-
tures by setting "BORDER ON" from the SYSTEM
SETUP menu.
5. Two kinds of Video Output Connectors
This system offers two kinds of video output connec-
tors :
(a) VIDEO OUT : A quad, 3x3, or full-size single pic-
ture can be selected with the front panel switch-
es.
(b) VCR OUT : A quad or 3x3 display is always sup-
plied by setting the VCR OUT menu.
into up to nine windows (3x3) for simultaneous display
of the nine different images.
Simple front panel switch operation allows quick selec-
tion between single, quad, and 3x3 camera display
modes.
6. A back-up memory inside maintains preset title
character information.
7. Video Loss Checking Function
If the video signal is lost due to a disconnected
cable or other reasons, an alarm buzzer beeps and
a caution message is displayed on the monitor
screen.
8. Connecting to a computer through the RS232C port
allows you to remote control the unit over an unlimit-
ed distance.
9. The Quad Shift function allows you to shift between
two quad pictures (each consisting of 4 picture seg-
ments).
10. Pauses can be inserted in the pictures (STILL
mode) only in multi picture mode when monitoring
camera picture.
11. You can monitor sequentially, full-size single or multi
pictures (quad or 3x3).
-1-
Advertisement
Table of Contents
