Panasonic WJ-MS488 Operating Instructions Manual page 11

3-1-3. Auto Channel Skipping (AUTO SKIP)
This parameter lets you enable or disable automatic
skipping of channels to which no camera is connected.
1. Move the cursor to the AUTO SKIP
** SYSTEM SETUP **
BORDER
VCR OUT *
AUTO SKIP
VIDEO LOSS
ZOOM SETUP *
START SCREEN
PLAY TITLE
STILL-SEL TITLE
2. Select ON or OFF.
ON: Channels to which no camera is connected are
skipped when the sequence mode is selected.
Note: When QUAD-A, QUAD-B, or 3x3 is dis-
played on the monitor screen, the multi pic-
ture is skipped only when no camera is con-
nected to any of the channels.
OFF: No channels are skipped.
1
2
3
4
parameter .
WHITE
OFF
ON
3x3
ON
ON
1
3
4
3-1-4. Video Loss Checking (VIDEO LOSS)
This parameter lets you activate a function that checks
whether the video signal is being supplied to the VIDEO
IN connector.
1. Move the cursor to the VIDEO LOSS parameter.
BORDER
VCR OUT *
AUTO SKIP
VIDEO LOSS
ZOOM SETUP *
START SCREEN
PLAY TITLE
STILL-SEL TITLE
2. Select ON or OFF.
ON: When video loss is detected, the picture
switches to the quad format. The message
"CHXX LOSS" appears on the monitor screen
and the alarm buzzer starts beeping.
OFF: The video loss alarm is ignored.
3-1-5. Zoom Setting (ZOOM SETUP)
The ZOOM SETUP menu lets you set the following
items:
• ZOOM POSITION
• ZOOM TITLE
1. Move the cursor to ZOOM SETUP.
BORDER
VCR OUT *
AUTO SKIP
VIDEO LOSS
ZOOM SETUP *
START SCREEN
PLAY TITLE
STILL-SEL TITLE
2. Press one of the SELECT buttons (+ or
ZOOM SETUP menu appears on the monitor screen.
3-1-5-1. Zooming Position (ZOOM POSITION)
This parameter lets you select whether to display the
zoomed picture in a fixed or variable area when the
playback multi picture (quad or 3x3) is monitored.
1. Move the cursor to the ZOOM POSITION parameter.
** ZOOM SETUP **
ZOOM POSITION
ZOOM TITLE
-9-
** SYSTEM SETUP **
WHITE
OFF
OFF
3x3
ON
ON
** SYSTEM SETUP **
WHITE
OFF
OFF
3x3
ON
ON
QUADRANT
ON
). The